Lectro Engineering

1643 Lotsie Blvd.

St. Louis, MO 63132​

314-567-3100​

2025 HORIZONTAL SPIN TRIMMER

2025 FEATURES & BENEFITS

Gives the container a clean neck finish. Extends life of the blade. Virtually any resin will trim in the 742R. Lower capital expenditure as one machine will work on many product lines.

Allows the blade to nest at the correct angle without a lengthy setup period. Reduced blade changeover time.

Designed to keep left hand and right hand blades in perfect alignment from the log centerline. Reduces changeover times and provides greater consistency.

Long life and greater consistency in throughput. Allows various line speeds to be run on a single trimmer.

Allows for better control of containers during the trimming process with no slippage on the drive pulleys.

Allows for quick changeovers increasing productivity. Reduces chance for operator error during procedure.

Vreplacement procedure. Increased productivity.

Reduces down time and eliminates incorrectly trimmed containers.

Proper bottle spacing and positive feed.

Faster response time from plant staff.

TRIM VIRTUALLY ANY TYPE OF RESIN WITH OUR HEATED BLADE TECHNOLOGY

The model MTM 2025 and MTM 2225 spin trimmers are designed to trim “log” containers.  These very high speed trimmers can handle over 300 containers per minute.  Two pulley variable speed drive system with “V” guide timing belt allows for excellent control of the containers during the trimming process with no slippage on the drive pulleys.  The stainless steel infeed chutes enable proper bottle spacing and positive feeding.  Standard features include:  Jam and incorrect trim detection system with light tower and audible alarm.  Some of the common and popular options include:

 

 

2025 SPECIFICATIONS

Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.