Industrial conveyor belt system design illustration.


The 2001D takeaway system has been designed to increase productivity, eliminate downtime, and reduce long term operating costs. It has the lowest cycle times of any takeaway system currently available, yet features a very competitive price point.

The 2001D servo takeaway system removes bottles from each mold with perfect stability and orientation of each bottle, eliminating nicks or scratches on the bottles. Our exclusive dual servo controlled gripper hands decrease cycle times by reducing overall motion and travel half the distance of any other takeaway systems to do the same amount of work. The gripper hands come predrilled for water cooling if needed. The 14” gripper hands are standard, but other smaller 10.5” or 7.5” gripper hands are available.

Machine Compatibility
While the 2001D system has been specifically designed to integrate with Bekum blowmolders, it works equally as well with several other types of shuttle type blowmolding machines. (See model listings below.)
PLC and Servo Systems

The 2001D leverages a high precision servo system and programmable controller which allows for easy and repeatable setup and configuration for a wide-range of containers produced by the blow molding machine. The system can store setup parameters for hundreds of different containers for easy access and quick change-overs. The user interface features a color touch screen with intuitive screens for quick access to all menus and stored setup parameters for each bottle. In addition, the system is designed with self diagnostic screens to assist in troubleshooting and startup. Unlike some servo based equipment from other vendors, MTM Systems does not limit or prevent customers from accessing the supporting programming for the servos, user-interface or programmable controllers.

In the unfortunate situation where the color user interface screen is damaged or rendered inoperable, the 2001D is specifically designed and programmed in a manner that allows the continued operation of the 2001D. This design feature can easily save many hours of line downtime. Lectro used this “failure analysis” approach throughout the design process with the goal and focus of keeping the line running.

Optional Deflash Station & Leak Detection Systems

As an option, the new 2001D can be purchased with our deflash station to remove scrap flash from handleware or other non-captive blown bottles. The deflash station is easy to install and utilizes programming and wiring that is already included in the takeaway system. This reduces the installation of the deflash station to a simple plug-n-play setup.

In some cases, the 2001D deflash station can utilize existing deflash punch tooling packages from other manufacturers, thereby reducing the need to invest in new deflash punch nest tooling.

Leak detection systems can be added downstream on our extended takeaway conveyor systems.

The daily operation of our 2001D is simple; just push two buttons located on the main control panel to startup the 2001D takeaway system. As said above, the color touch screen is only used for “Easy Touch” bottle setup (setting up a new bottle recipe), to change to an existing recipe on a changeover or to utilize our exclusive self diagnostic screens.
  • Bekum H111, H121, H151, H155
  • Fischer 54 or 106 series
  • Other Shuttle Type Blowmolders


Equipment dimensions and utility requirements chart.
Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.

Lectro Engineering Co. designs, manufactures, and sells high performance trimming and handling solutions for the plastics industry. Lectro Engineering Co. has been offering solutions to the plastics industry now for over 50 years. Our equipment is used worldwide 24/7. Lectro is recognized as a world leader for handling and trimming solutions.




2001D FEATURES & BENEFITS Dual 14” Servo Gripper Hands Exclusive to the MTM 2001D

  • Doubles up on process with half the linear motion
  • Decreases overall cycle times
  • Less wear and tear on the system

Allen Bradley PLC Control System

  • Most plants are already have the software and are familiar with the programming
  • Readily available to reduce potential downtime
  • Worldwide AB support

Allen Bradley Servo Motion Controlled System

  • Reliable performance and reliability
  • Worldwide AB support

New Carriage Transfer System

  • The HMI has a color touch screen for easy reading and great contrast
  • Intuitive screens for quick running and setup
  • Able to store 99 alpha-numeric setup recipes
  • “EASY TOUCH” self teaching setup mode

Heavy Duty Linear Rail Design

  • Reduces frame fatigue
  • Reduces machine vibration
  • Improves life, reduces maintenance and downtime

Mobile Main Control Console

  • Movable to aid in visual setup
  • Isolates the main PLC and servo drives boards from even the slightest blowmolder vibrations
  • Easier to maintain if required

Deflash Punch Station (Optional)

  • Allows deflashing of handle and non handleware bottles
  • Drops over existing vacuum takeaway conveyor supplied with the 2001D takeaway system
  • All deflash logic controls are provided in the Mobile Main Control Console standard, no additional charge
  • Deflash station is Plug-n-Play with 2001D controls

Isolated Deflash Punch Station Pneumatics (Included with Optional Deflash Station)

  • Mounted on isolated sub frame to minimize vibration from deflash station
  • Easily accessible for minor adjustments
  • Improves life of the components and reduces downtime

Leak Detection (Optional)

  • Allows short floor plan layout as most all leak testers can be mounted directly to our optional takeaway tabletop conveyor
  • Improves quality control for better customer satisfaction

Integrated Scrap Conveyor

  • Able to run in either direction for easier clearing of startup scrap materials
  • Integrated within the main frame to improve durability
  • Integrates with customer plant scrap removal system

Fully Guarded

  • Complies to ANSI specifications
  • Made from heavy duty extruded aluminum and windowed with durable clear PETG
  • Provides a safe environment for the operators
  • Allows easy access to all running locations and maintenance  areas
White triangle on a gray background.
Contact a MTM application expert
White and gray abstract geometric background