2025 HORIZONTAL SPIN TRIMMER

2025 Series industrial horizontal spin trimmer machine.

TRIM VIRTUALLY ANY TYPE OF RESIN WITH OUR HEATED BLADE TECHNOLOGY

The model MTM 2025 and MTM 2225 spin trimmers are designed to trim “log” containers. These very high speed trimmers can handle over 300 containers per minute. Two pulley variable speed drive system with “V” guide timing belt allows for excellent control of the containers during the trimming process with no slippage on the drive pulleys. The stainless steel infeed chutes enable proper bottle spacing and positive feeding. Standard features include: Jam and incorrect trim detection system with light tower and audible alarm. Some of the common and popular options include:

  • Remote Control Box allowing access to controls on either side of conveyor
  • Upright

SPECIFICATIONS

Industrial equipment specifications chart.

Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.

spacer-left-2
spacer-right

FEATURES & BENEFITS

E

Heated Blade Technology

Gives the container a clean neck finish. Extends life of the blade. Virtually any resin will trim in the 742R. Lower capital expenditure as one machine will work on many product lines.
E

New Redesigned Blade Holder

Allows the blade to nest at the correct angle without a lengthy setup period. Reduced blade changeover time.
E

New Redesigned Blade Holder Adjustment

Designed to keep left hand and right hand blades in perfect alignment from the log centerline. Reduces changeover times and provides greater consistency.
E

Heavy Duty 1/3 hp Drive with DC Variable Speed Controller

Long life and greater consistency in throughput. Allows various line speeds to be run on a single trimmer.
E

New Two Pulley Drive System with “V” Guide Timing Belt

Allows for better control of containers during the trimming process with no slippage on the drive pulleys.
E

Simplified Belt Tensioning

Allows for quick changeovers increasing productivity. Reduces chance for operator error during procedure.
E

PLC Controls with Panel Mounted User Interface

Replacement procedure. Increased productivity.
E

Jams and Incorrect Trim Detection

Reduces down time and eliminates incorrectly trimmed containers.
E

Stainless Steel Infeed Chute with Bottle Metering

Proper bottle spacing and positive feed.
E

Spring Loaded Quick Change Belt Tensioning

Reduces chance for operator error during procedure. Increased productivity.
E

Audible Alarm and Beacon Lights for Detection Devices

Faster response time from plant staff.
White triangle on a gray background.

Contact a MTM application expert

White and gray abstract geometric background